Posted by Dave W on 12/01/05 - 3:21 PM
#1
Hi All,
I'm trying to determine the best way to mount a Lowrance LCG-2000 GPS receiver (round, about 3" in diameter and 4 inches thick) to a standard Outrage 18 console. I thought I saw a picture on here from someone who'd attacked this problem? The receiver base is threaded, so at this point, I'm thinking about a stainless pole in the middle of the console that rises to just above the hand rail and is just behind the windshield. The other challenge is that the cord is 25' and the plugs are about 1/2" thick, so routing and hiding the cable presents a problem. Any thoughts, ideas, are appreciated.
Tks,
Dave W
Posted by Joe Kriz on 12/01/05 - 4:24 PM
#2
Dave,
I think you might be talking about Royce's Outrage 18.
Check out his boat in the Members Personal Pages here and see if this is what you are referring too:
http://whalercentral.com/infusions/pe...user_id=45