---

I have tried to look on my own for the "OMC emblem/plug" on the control handle and rubber boot for the throttle only switch on a late 90's-2001 or so dual binnacle controller but haven't had any luck. i was wondering if someone knew or was better at finding these parts than I am.

---

The OMC emblem is no longer available.
There is an updated emblem that says "Bombardier" as I ordered a couple of these last year.

I will look into my records and on the website.

---

Bob, I've got to ask.... is that really a picture of you? :D

---

Bob,

That was easy to find.....

1. Go to "Accessories" at the top drop down menu.
2. Then go to the year, "1990"
3. Then go to the "Remote Control Assembly, Binnacle Mount"
4. All the parts for the Remote Control show up on this page.
5. You want number "1." = Applique. part number #0123315
6. You might also need "3." = Button, Applique #0124705
(The Applique is the same for both remote controls prior to 1996 and after 1996.
However, you might also need the "Button, Applique" if you have the 1996 and newer version. So, you might need 2 parts... The Applique and the Button, Applique).

This is or course if this is the same Remote Control that you have... 1990 to 1996 style.
You mention something about the 2000 model... That would be different as they changed in 1996.
http://www.whalercentral.com/readarti...icle_id=56

I do not understand what you are talking about with the "rubber boot for the throttle only switch".
I don't know of a throttle only switch....

---

Dan-Thankfully(or unfortunately,whichever the case may be) I don't look like uncle Buck :D


Thanks Joe,I have the 1996 and newer style and the "throttle only" is that little black square mechanism on the top of the controller housing by the throttle/shift lever. I need the rubber boot that just sits over the mechanism to keep the elements out. I will probably need the appliqueand the emblem on the plug/emblem assembly.

---

Bob,

OK.... I know what you are talking about now.
Yes, that rubber cover is shown in the parts diagram on the 1996 and newer remote controls.
There are 2 of them for the dual control....
I suggest you order 2 of them so you have a spare. Many times these get lost when people take the controls off.

---

Parts ordered, Thanks again Joe or is that "Mr OMC/BRP"? Lol

---

I though I was going to have to order one of those before I ever got the control installed. I had all the deck plates off the 18 and when I was installing throttle/shift cables and getting things screwed down it blew off and under the gas gauge.