Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Evinrude diagram

Posted by Project13 on 06/28/11 - 6:38 PM
#1

Does anyone have a wiring diagram for an '80 50hp motor? I looked in the downloads and did not see anything. Need to determine what setup I need, I don't see the big red plug inside of the motor and that is what controls I got with my project.

Thanks

Posted by Derwd24 on 06/28/11 - 7:02 PM
#2

If you go to http://shop2.evinrude.com and select your year and hp in the left column, then select ignition system, you'll see that part #34 Motor Cable Assembly seems to be the engine side of the connector you seek to match the shift side.

Posted by Joe Kriz on 06/28/11 - 7:52 PM
#3

Scroll down to about the middle of this article and you will see the red plug along with all the wires and info where they connect to.
http://www.whalercentral.com/articles...icle_id=72