---

Im Having a Custom radar arch fabricated for my 1986 Revenge 22 WT, Looking for some Photos for ideas on mounting and overall look. I will be going with Stainless and looking to incorporate a bimini cover into the arch as the back support. even if its not an arch for a Revenge or eve a Whaler for that matter would just love some ideas!


Thanks!

---

Here's one idea. Picture's towards the bottom of the link.

http://bcfishinggrizzlytours.com/BC%2...shing.html

---

Take a look at Atlantic Towers. Lots of pictures to browse.

http://www.atlantictowers.com/photofi...finder.php

---

Here is the radar arch on my Outrage 25. Besides holding the antennas and rod holders, it has the high center navigation/anchor white light, two flood lights, GPS receiver, and Lee side mount outrigger holders for ocean trolling.

http://smg.photobucket.com/albums/v42...rage%2025/

A friend has a beutiful Revenge 25 with an arch, which in that model mounts to the sides of the cabin, instead of gunwales.
Be sure your fabricator does it with enough "layback" angle.

I would recommend you have it done so that the Mills canvas can be used, and the arch stands clear of the canvas when set. You can see that in some of my photos, and my friend's Revenge is done that way also. The Mills canvas system for the Revenge models is a beautiful setup.

---

The RADAR arch on my Revenge 25 Walk-Through was beautifully made by Rail Makers:

http://home.comcast.net/~tomwclark/Re...meCove.jpg