Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: 1969 Johnson 85 HP Electrical Schematic

Posted by Jack Jordan on 02/25/11 - 9:37 AM
#1

I have a model 85ESL69E Johnson 85 HP that was a freebe. Compression is 120 psi per cylinder. Problem is the harness to the remote was cut and the key SW panel is trashed electricly. Does anyone know where I can find the sechmatics for this engine?

Posted by Joe Kriz on 02/25/11 - 1:02 PM
#2

I am not sure about the older models but take a look at this article.
Scroll down to "Wiring Harness"
http://www.whalercentral.com/articles...icle_id=72

Look at the colors of the wires as they should be fairly standard for OMC.

Does your harness look like this?
http://www.whalercentral.com/images/a...arness.jpg

Posted by Jack Jordan on 02/25/11 - 2:20 PM
#3

Mine has 10 wires and black connector. It's the hydro-electric drive model.

Posted by Jack Jordan on 02/25/11 - 2:23 PM
#4

Looks like this one with the electric shift
http://cgi.ebay.com/ebaymotors/Johnso...iesQ5fGear

Edited by Jack Jordan on 02/25/11 - 2:24 PM

Posted by luckydog on 02/26/11 - 8:19 AM
#5

Jack, I scanned the schematic that you need from my book, but as usual I can't seem to post it. Do yo have an email address that I can sent it to as an attachment?

Posted by Binkie on 02/26/11 - 7:07 PM
#6

Go to this link -Antique outboard Motor Cub- http://www.aomci.org/ and ask the same question in their ask- a -member forum. you will get your shematic.

Posted by Jack Jordan on 02/26/11 - 8:32 PM
#7

Luckydog emailed wht I needed, Thanks
Still no spark in the old stuff, considering the MSD canversion. Used MSD5 on ebay for $20 rather than the fragil OMC aftermarket parts for $475.