Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Compression check of 60 hp Evinrude

Posted by clarky on 10/10/10 - 2:02 PM
#1

All 3 clinders at aprox 135. Is that ok

Posted by Derwd24 on 10/10/10 - 3:40 PM
#2

What year is it? Should be fine... How's it run overall?

Posted by Fishmore on 10/10/10 - 3:50 PM
#3

Sounds good to me. I go by if all cylinders are within 10% of each other you are good to go.

Posted by clarky on 10/10/10 - 4:11 PM
#4

Thanks for the info. Its a 1995 that i have taken care of . I have a problem with the oil. It used a half of the resvor of oil while burning 8 gals of gas. today.

Posted by Derwd24 on 10/10/10 - 5:13 PM
#5

Is it excessively smoky or is there a leak in the system somewhere?

Posted by clarky on 10/10/10 - 5:24 PM
#6

Smoaky . cuts off at idle speed

Posted by Derwd24 on 10/10/10 - 5:47 PM
#7

First thing to check is for an air leak in the fuel line/system. Aerated fuel entering the VRO pump makes it cycle much faster than usual and as a result it pumps much more oil than it normally would.

Posted by clarky on 10/11/10 - 6:58 AM
#8

Dave, thanks so much for the info. clip on gas tank connector was not properly working . have replaced with nipply contected directly to hose. working fine now. you saved me many bucks. thanks

Posted by CES on 10/11/10 - 7:28 AM
#9

clarky wrote:
Dave, thanks so much for the info. clip on gas tank connector was not properly working . have replaced with nipply contected directly to hose. working fine now. you saved me many bucks. thanks


Dave is an excellent source for good, quality information. He's helped me out several times.

Glad you found your problem and learned from your experience.