1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Z Legs
nvaccaro	#1  Posted on 11/14/09 - 6:14 PM
Member Personal Page Posts: 209 Comments: 0 Joined: 08/22/07	I just reinstalled my RPS after varnishing it. I'm now looking at the z legs and thinking they need attention. Any advice? Have any of you guys painted or polished them?
modenacart	#2  Posted on 11/14/09 - 7:04 PM
Member Personal Page Posts: 741 Comments: 4 Joined: 02/28/09	Clean then rub with penetrol. Works great. You can find it in the painting section of your home improvement store. Its normally used to mix with paint to reduce brush marks. They that give up essential liberty to obtain a little temporary safety deserve neither liberty or safety. --Benjamin Franklin
Bake	#3  Posted on 11/14/09 - 7:47 PM
Member Personal Page Project Albums Posts: 902 Comments: 8 Joined: 01/30/06	I cleaned a set that were weathered to a chalky white. I had to scrape it down with paint scrapers and such. a couple of coats of the penetrol and they looked really good.
nvaccaro	#4  Posted on 11/15/09 - 6:23 PM
Member Personal Page Posts: 209 Comments: 0 Joined: 08/22/07	Thanks guys. I finished varnishing my teak this weekend. I'll put it all back on this week and hit the z legs with the penetrol next weekend. That should do it in getting her ship shape for the Thanksgiving trip to Toledo Bend. Thanks for the help.