1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

help with 88 guardian 20
saltylabrador	#1  Posted on 07/17/09 - 3:16 PM
Member Posts: 2 Comments: 0 Joined: 07/16/09	My boat has a ss keel guard on it and i removed it to reseal and replace the fastners 40 of them my question is what type of sealant is good for this?keep in mind cure time with 40 fastners and it will take a quart or more. also replacing all through hull drains with the same seaant. also could leave it off but like the heavy duty military look its an ex everglade ranger boat.any help apriciated.
skatebros	#2  Posted on 07/19/09 - 1:40 PM
Member Personal Page Posts: 4 Comments: 0 Joined: 04/07/09	everyone uses the 3m 5200 i believe. clean everything really good first.
Phil T	#3  Posted on 07/19/09 - 4:22 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	The cure time for regular 5200 is 5-7 days. It is tack free in 48 hours. Not sure if it is sold in quantities larger than a 10 oz cartridge.
Tom W Clark	#4  Posted on 07/19/09 - 6:31 PM
Member Personal Page Posts: 4280 Comments: 7 Joined: 09/30/05	It will not take more than one or two tubes. One quart is absurd. You can also buy 3M 5200 FC (Fast Cure) which cures in 24 hours.
saltylabrador	#5  Posted on 07/21/09 - 8:31 PM
Member Posts: 2 Comments: 0 Joined: 07/16/09	Thanks for all the help i will try to find some hopefully not to expensive.