1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1995 - Montauk 17
dakqc	#1  Posted on 07/15/06 - 4:06 PM
Member Posts: 11 Comments: 0 Joined: 07/07/06	I recenlty purchased a 1995 Montauk 17 that was garage kept and is in like new condition aside from not having a Bilge sump hole cover. It appears that at one time it may have had a cover as there are screw holes present. Any ideas as to what that bilge cover may be made of and pictures of it in place? Thanks in advance.
Joe Kriz	#2  Posted on 07/15/06 - 5:35 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11447 Comments: 452 Joined: 03/18/05	dakqc, There is a drawing of the sump cover in the "Dowloads" section. You can download the drawing there. The early Montauks used Teak plywood. The later Montauks used Starboard or Whalerboard. Here are some photos of my prior 1978 Montauk with the teak plywood sump cover. The second photo down: http://users.sisqtel.net/jkriz/Montau...ntauk.html Edited by Joe Kriz on 07/15/06 - 5:35 PM
dakqc	#3  Posted on 07/15/06 - 7:51 PM
Member Posts: 11 Comments: 0 Joined: 07/07/06	Thanks for the quick reply and the photos of your bilge cover.