|
Montauk Console
|
| nvaccaro |
Posted on 12/14/08 - 7:34 PM
|
Member
Personal Page
Posts: 209
Comments:
0
Joined: 08/22/07
|
Hey guys:
I posted earlier about converting my Striper model to a center console, like a Montauk.
I've decided to go ahead with the project. I have considered building the console. I'm curious if maybe I could buy a Montauk console. Any ideas?
I looked in the downloads section to see if their were any plans for building a Montauk console, but didn't see anything.
Any advice would be appreciated. If any Montauk owners could provide me with some dimensions, Ii would greatly appreciate it.
Thanks.
|
| |
|
|
| bigdaddywhaler |
Posted on 12/14/08 - 8:26 PM
|
Member
Posts: 11
Comments:
1
Joined: 12/13/08
|
I'm just found this site. I own a 69 Nauset with a custom built center console and a 25 outrage with an aftermarket console. I would recomend building one. If you can find a Suzuki catolog from about two years ago. It has the picture of Abe Cuang's montauk. He built the console and it work out perfect. I'm copying the design and building one for the nauset and outrage. I'll download it as soon as I can.
|
| |
|
|
| nvaccaro |
Posted on 12/14/08 - 8:37 PM
|
Member
Personal Page
Posts: 209
Comments:
0
Joined: 08/22/07
|
Thanks for the info.
Are you planning on fiberglassing it or is it going to be marine varnished wood?
|
| |
|
|
| Paul Graham |
Posted on 12/15/08 - 9:45 AM
|
Member
Personal Page
Posts: 123
Comments:
0
Joined: 05/18/07
|
A buddy of mine has a 1986 Montauk console mold, he makes new shells, hand laid about 1/4" thick with glassed in wood at the helm and control box for $750+ S&H, he will also complete the console will new rail, windsheild and doors for $1600
|
| |
|
|
| kamie |
Posted on 12/15/08 - 3:45 PM
|
Member
Personal Page
Project Albums
Posts: 2975
Comments:
3
Joined: 11/04/05
|
You can still purchase one from BW, call Sue @ Twin Cities. Not sure what the price is but asking is free.
|
| |
|
|
| oliver1234 |
Posted on 12/15/08 - 6:28 PM
|
Member
Personal Page
Posts: 114
Comments:
0
Joined: 10/02/07
|
you can find the dementions on this site: look at the botom of the article about center consoles, there should be a link to a page with the dementions.
|
| |
|
|
| Jeff |
Posted on 12/15/08 - 7:20 PM
|
Member
Posts: 1987
Comments:
34
Joined: 04/02/05
|
I have found a guy in Texas that is remaking the Montauk Consoles. He has both the 1986 to 1990 generation console and the newer style 1990 - 1991 like what was used on the outrages. Both are $850 and come with no holes cut in them. Here is his information.
Joe Orlando's Fiberglass
Boat repairs and restoration
Gelcoat work & repair
Boston Whalers
1145 FM 518, Kemah, Tx
281-334-2902
Here are the dimensions your are looking for.
[img]http://www.whalercentral.com/forum/attachments/standardconsoledims1low.jpg[/img]
[img]http://www.whalercentral.com/forum/attachments/standardconsoledims2low.jpg[/img]
[img]http://www.whalercentral.com/forum/attachments/standardconsoledims3low.jpg[/img]
[img]http://www.whalercentral.com/forum/attachments/standardconsoledim4low.jpg[/img]
The above photos are all hosted on WhalerCentral.com so they will remain available for future viewing.
Edited by Joe Kriz on 03/23/10 - 3:01 PM |
| |
|
|
| Karlow |
Posted on 12/30/10 - 10:59 PM
|
Member
Personal Page
Posts: 192
Comments:
0
Joined: 07/20/10
|
I will most likely be doing a similar conversion on my 1990 GLS SS 17'. The super sport interior is not very practical for us fishermen. My rig needs a lot of work!
KP
|
| |
|
