1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Navigation lights not working
chammond	#1  Posted on 12/08/21 - 3:08 PM
Member Posts: 10 Comments: 0 Joined: 06/20/21	I’m at a loss for how to find the problem. 2019 montauk 170, the Nav lights are not working, the switch lights up but no lights. These are LED type. I guess I could pull the light and check if I have power to the fixture. The weird thing is the rocker switches all have a white breaker button below the switch with a rubber cover, the one for Nav has a black button? Might be a lower voltage ? I thought just maybe ???? one of you have had this issue. I bought the boat last year and it had never been in the water. Thanks for any help.
Phil T	#2  Posted on 12/08/21 - 3:23 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Did you review the electrical diagram from the Owners manual. It's there. Check the breakers inside the console. Should be one for Aux, bilge etc. Reset each one. Report back. 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
chammond	#3  Posted on 12/09/21 - 4:23 PM
Member Posts: 10 Comments: 0 Joined: 06/20/21	Ok so I found it by reading old posts. I worked the switch fast about 10 times and it came on. Now it works fine. I have never turned them on before. The boat sat for 2 years never in the water, I go out in the day so never had them on. Thanks for the help.