1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

fire extinguisher for 2000 Ventura 21'
wildings	#1  Posted on 11/19/21 - 6:03 AM
Member Posts: 3 Comments: 0 Joined: 02/16/20	Have any of you had success in finding a replacement for the fire extinguisher at the helm below the throttle/shifter? There is a recess for this purpose, but the original Kidde extinguisher is no longer made, which was 13 3/4 tall. Opening is just under 14". Closest I can find are a 12" Kidde and two others over 14". I can use the 12", but would prefer to fill the space as intended without changing the bracket and having an open space in the recessed slot, and having less material in the device canister. Thank you, and best to all from Florida Gulf Coast
Phil T	#2  Posted on 11/19/21 - 8:07 AM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	Amerex is a second national brand. Their sizes are not compatible. I would look at modifying the recess or replacing it with a larger size. Whaler sourced the pockets from SSI. Here is a screen grab of the pockets from the current SSI catalog, a good manufacturer, with measurements. Nauset Marine: https://www.nausetmarine.com/boston-w...s/storage/ Flounder Pounder also carries a insert: https://www.fpmarine.com/Paragon-Plas...sherwi.htm Phil T attached the following image: [128.75Kb] Edited by Phil T on 11/19/21 - 8:20 AM 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
wildings	#3  Posted on 11/19/21 - 8:31 AM
Member Posts: 3 Comments: 0 Joined: 02/16/20	Thank you, I think I will just modify the bracket position. I have a larger extinguisher mounted on underside of stern seat, which is always raised to vertical, and one in battery cubby. Thank you for your information.