1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1991 Outrage 19 engine height
prowsom	#1  Posted on 10/20/15 - 10:05 AM
Member Personal Page Posts: 3 Comments: 0 Joined: 04/30/09	Please see my personal page for photo. I have a feeling based on the photo of my 1992 Johnson 120 while running that it is too low. It is raised up one hole. Should I see the Cav Plate ? It is clearly not showing in photo. 1991 Outrage 19 - 1992 Johnson 120
Phil T	#2  Posted on 10/20/15 - 2:04 PM
Administrator Personal Page Personal Album Project Albums Posts: 7043 Comments: 6 Joined: 03/26/05	You should go up at least one more hole, maybe even 2. Go 1 at a time. Be aware you will gain 150 rpm's at WOT for each hole you raise the motor so you might be at or exceed WOT rpm's.