1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Johnson crossflow v4 115 cracked plastic cover
gerobertson1	#1  Posted on 06/08/15 - 12:02 PM
Member Personal Page Posts: 65 Comments: 0 Joined: 05/06/08	Does anyone know what the name of the plastic cover is below the lower engine cowl. It wraps around the motor below the lower cowl and has 4 bolts holding it on closest to the transom of the boat. While docked a boat bumped mine and punched a hole in the plastic cover. I need to figure out if it is cheap enough to replace or is it easier to try and repair with epoxy. Thanks for the help.
Weatherly	#2  Posted on 06/08/15 - 1:08 PM
Member Posts: 752 Comments: 4 Joined: 12/31/06	The part is called the Exhaust Housing Rear Cover Assembly . The part is available at www.marineengine.com for $50. See link: http://www.marineengine.com/newparts/...OMC0279108 Edited by Weatherly on 06/08/15 - 1:24 PM