Before Posting, Please Read Our Posting Guidelines Below.
1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011 2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260 3. Include the length when necessary. Example: 16, 17, 18, 20, 22 4. Do not post your email address anywhere on this site as it is already in your user profile.
I have a Fuel Tank Cover off my 1984 Outrage 18' for sale. Needs to be re-cored but is in good shape to do so. I replaced mine with 1" seaboard and dont want to junk it Im sure someone will want or need it.
(moderator note: please follow guideline #1 on the front page and use the full 4 digit year)
Hopefully one of the more knowledgeable fellows could chime in. I have a 1979 22ft Revenge where the cabin prevents me from removing the fuel tank deck cover. If ever I need to remove the tank a shorter version deck cover might be adapted. What are the dimensions for your cover? does it have two access ports fore and aft? If it could fit I may want it for future use. Thanks for your offer.
gchuba
I am not sure if it would work or not, like you said, maybe some more knowledgeable fellows could chime in. It is 48 1/4" wide and a little over 10' long. "Access ports" if you are talking about the deck plates it has 2 in the aft section 2 in the center and 1 in the fore section. These are all for access to the fuel tank fittings (pick up tube, vent hose, fuel filler hose, fuel gauge, and rear sump)
Thanks for the information. I am pretty sure it will not work. Mine has 2 deck plates, one fore and another aft, in the center of the deck cover. I was just looking to the future if ever I have to ugh! remove my fuel tank.
gchuba