Beckson Pry-Out Deck Plates

Supporting safety and reliability aboard, Beckson pry-out and screw-out deck plates in all sizes are now certified by independent lab testing to exceed FIVE certifications! ABYC H-3 Watertightness, ABYC H-4, NEMA 250 6P Submergence, ISO 12216 and ISO 11812

Pry Out Deck Plate by Beckson
Beckson developed the first pry-out deck plate as an access cover to its permanently mounted pump. These pry-out plates were designed with an extra heavy O-ring to assure a water tight fit.

Plates are provided with non- skid or smooth surfaces for different installation requirements. The Diamond Pattern Deck Plate takes a proven watertight product a step further. The non-skid pattern extends across the center, eliminating the edge ring that traps dirt and debris. Rain and spray keep the non-skid surface clean.

Our clear center plates permit observation of controls or gauges and visual inspection without the necessity of removing the plate. Pry-out plates should be installed in areas where internal pressure (oil-canning) is not present.

OEM Note: Specials color/materials and logo centers are available.
6" Pry-out Deck Plate - Standard Trim Ring  Replacement Gasket = D6P-G
Outside Diameter: 8 1/8" (15.6 cm) Inside Diameter: 6 3/16" (15.5 cm) Hole Cut: 6 1/2" (16.5 cm)
Thin Rim with or without screw holes may be available in some color / material combinations. Thin rim OD is 7.50"

8" Pry-out Deck Plate - Standard Trim Ring Replacement Gasket = D8P-G
Outside Diameter: 10" Inside Diameter: 8" Hole Cut: 8 1/2"
No thin rim available.

Click on Model# to order
 Model# Color Center style
DP61-B Black Smooth
DP61-B-C Black/Clear Smooth
DP61-W White Smooth
DP61-W-C White/Clear Smooth
DP63-B Black Dimple
DP63-N Beige Dimple
DP63-W White Dimple
DP65-B Black Diamond
DP65-N Beige Diamond
DP65-W White Diamond
 Model# Color Center style
DP81-B Black Smooth
DP81-B-C Black/Clear Smooth
DP81-W White Smooth
DP81-W-C White/Clear Smooth
DP83-B Black Dimple
DP83-N Beige Dimple
DP83-W White Dimple
DP85-B Black Diamond
DP85-N Beige Diamond
DP85-W White Diamond


Boston Whaler Colors are Back

Due to demand for Beckson plates for restoration and to renew older boats, we ran some in the original OEM colors.

Click on part number to order.
DP63TK OD = 7-1/2"  ID = 6-3/16"  Hole Cut = 6 1/2"  Thin rim dimple center khaki color.
DP83-K OD = 10"  ID = 8"  Hole Cut = 8-1/2"  Full rim dimple center khaki color. Slightly larger hole cut than original.
DP61TK-C OD = 7-1/2" ID = 6-3/16" Hole Cut = 6-1/2" Thin khaki color rim Clear smooth center