The old holes used for the prior engine mounting position (blind holes and extra holes drilled in upper engine mount) were plugged using 1/2" diameter plugs of 3/4" plywood and epoxy. The thickness of the plugs was matched to the thickness of the plywood embedded in the transom by Boston Whaler when the boat was constructed. The plugged holes were then filled with factory-matched gelcoat patch paste purchased from Spectrum http://www.spectrumcolor.com and sanded flush with the outer and inner surfaces of the transom.
Click image for maximum view
Date: 12/22/13 - 5:55 AM
Added by: wlagarde
Dimensions: 640 x 480 pixels
Filesize: 166.07Kb
Comments: 1
Number of views: 2138
|