Whaler Central - Boston Whaler Boat Information and Photos

Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: 1986 newport 17

Posted by Okanaganwhaler on 04/09/23 - 1:06 PM

90hp merc just tuned last season. installed new steering hardware, can't wait to try it
remove the RPS seat, deck screws failed, rebuilding seat frame with Oak. any suggestion on how to attach to underside of seat. i really don't want to have to rebuild the seat. can i use longer screws for the deck?
Thanks for a great site!!

Posted by Phil T on 04/09/23 - 2:49 PM

The RPS screws are driven in to the floor at a location that has embedded wood for additional support.

If these holes are stripped you have two options:

Overdrill the holes and fill with epoxy (Locktite Marine Epoxy) then tap for screws.

Use toggle bolts. Drill out the foam a little using an allen wrench.
https://www.wholesalemarine.com/searc...on=content

Posted by Okanaganwhaler on 07/15/23 - 10:36 AM

thanks Phil, got the woodwork done . about to seal white oak before putting the seat together. linseed oil every year is the way i'm thinking. any suggestions?

Posted by Phil T on 07/15/23 - 3:11 PM

I like oil, its simple to do and does not require all the prep.