Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: 1989 Montauk Console question

Posted by TroJo on 02/09/18 - 8:27 PM
#1

Anyone have details on black stripe on console ?? Width and location measurements in relation to top of console?

Appreciate the help.

Also, how far down does the windshield mount on the console (overlap). My new windshield came with no holes in It.

Posted by Weatherly on 02/10/18 - 5:40 AM
#2

The measurements of the black vinyl horizontal stripe on my 1990 Montauk 17 console are as follows:
1 1/2 inches wide
19 1/2 inches long on right side of console
@30 inches long on front of console (measure your own console front without windshield in place to confirm this figure)
14 1/4 inches long top left side of console
15 1/2 inches long bottom left side of console
The stripe was applied 1/2 inches down from top of console

The windshield on my Montauk 17 was attached to the console using 7 fasteners and wellnuts approximately 3/16th of an inch above the black vinyl stripe.

Edited by Weatherly on 02/10/18 - 5:42 AM

Posted by TroJo on 02/10/18 - 9:27 AM
#3

Thanks!!

Are the mounting holes in the middle of the black strip ?

And how far up are the holes in your windshield from the bottom of the plexiglass??

Really appreciate the feedback.

Posted by Weatherly on 02/10/18 - 12:00 PM
#4

Yes, middle of the black strip.

The mounting holes are 1/2 inch up from bottom of the plexiglass.

Posted by TroJo on 02/10/18 - 7:04 PM
#5

Perfect! Thx for the help.

Posted by Joe Kriz on 02/11/18 - 12:09 PM
#6

Here is an article we have that might interest you.

1983-1985 standard console which is very close to what you have.
http://www.whalercentral.com/articles...cle_id=107

Posted by TroJo on 02/11/18 - 7:40 PM
#7

Thanx Joe, managed to get it all painted last night, decent result, appreciate the help, thanx guys.