Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Installing an additional 9.9 engine on a Montauk 190 2011

Posted by JRP on 01/12/18 - 5:47 AM
#6

JackMuffin wrote:
My mechanic mantains that I need the long leg, but I am not completely sure of this.
Let’s make this scenario: the 150hp engine, when “tilted” keeps the propeller well over the water.
If I install such a Bracket which has an ‘up” position, the 9.9 propeller, once tilted, should be well over the water, higher than the 150 when tilted.
I am not sure that a short leg engine goes well under the water line, which is worst...


Garelick has some good instructions for mounting the bracket, on their website. These may help you to choose between the long leg or standard leg engine. Usually long leg is for sailboats, though.

http://www.garelick.com/files/12.295.pdf12.295.pdf

Additional specs on the Garelick bracket options:

http://www.garelick.com/Aluminum-Auxi...oke-Motors

Also, I don't know if you can order from West Marine, but they are running a discount sale this weekend on the brackets:

https://www.westmarine.com/outlet/buy...ecordNum=8