---

I can't comment on the hull but 22 years is a pretty old motor. I ran an ocean pro 200 on a Well craft coastal. It ran okay but starting cold wasn't always easy. The trick is to be sure the primer bulb is pressurized. Then push in the ignition key without turning it for 5-10 seconds. Then start her up. If it hesitates or tries to stall push in the key and that will dump gas straight into it.

Make sure to test the compression. It should be over 100psi and all cylinders should be within 5 psi of each other. If the compression is off you can use that to bargain on the price since a re power isn't far off in the future.