Posted by mtown on 06/28/17 - 12:55 PM
#7
Phil T wrote:
If the engine ran then you blew a fuse, yprobably ou melted something.
Solenoid or a wire
That was my thoughts too.
Wire that has failed can be impossible to see. Check for any of the critical wires having a lot of flex in a spot.
I had a bad lead from my battery that was thick woven copper cable and looked great from outside. Only way I found it was internally failed was I used a jumper cable to "replace" it.
Once I knew it was bad I stripped the insulation and found the green failure.