---

Hi - I'm wondering if anyone knows of any visual (drawing, schematic, diagram, photo) source for information about the hull layout and bilge location for an 1989 Revenge 22' WT. I'm just diving into tracking down how the bilge pumps are setup (from previous owner) and it seems pretty hard to understand based on written descriptions. I currently have two bilge pumps on the boat, one in the main large bilge in the center of the deck (next to drain plug) and a second located in a small well in starboard side near the transom. This smaller one has a "rule" switch, and can be turned on and off with a switch at the helm. The one in the main large bilge used to be wired directly to one of my batteries (and nothing else) but I have disconnected it because it would switch on every 2 mins or so regardless of water presence, draining the battery. I think once I have a better understanding of how the bilge pumps are supposed to work in the correct locations I can tackle how to reconfigure or rewire them to work in unison. Thanks for any advice you can give!

(fixed typo in year per guideline #1 at the top of this page)