Posted by acassidy on 05/20/17 - 7:27 PM
#1
Well I did it. I just picked up my latest project. 1994 outrage 24. Boat has been sitting for ten years not being used, not powered. It will take some work to get it up and going again. This is my 4th restore, I have done 1978 Montauk, 1983 22 outrage and most recently 1977 19' lowpro. Which will be up for sale soon.
I am looking for information about the hull. Including owner manual, wire schematics colors and plumbing and pump setup. Really any resourses that you could share would be great. I plan to put pictures up once I get it started. Thanks for any help. Should be a fun project
Archie
Posted by Phil T on 05/21/17 - 12:11 PM
#2
Archie -
1994 was well before Whaler rigged the engines and electronics at the factory so the wiring is going to be a big ? since it was done by a dealer. Who know what guide they followed.
Will look around.
Posted by draftsman on 05/22/17 - 6:02 AM
#3
Congrats on the 24.. Great boat! I have copies of most of the mechanical installs, but no detailed parts... Wiring was done in-house on lay-out boards, no drawings will be found... i know there were 3 harness, 2 for hull and 1 for console. As far as the engine install, we would have done "pre-rigs", installing everything but the engines component wise, if ordered that way. Owners manuals were pretty generic, probably won't do a lot of good for you...