Whaler Central - Boston Whaler Boat Information and Photos

Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Kicker Bracket for a 1975 revenge 21

Posted by Johnnyt707 on 03/29/15 - 10:04 AM

hey guys on my old revenge 21 there was a stainless kicker bracket that i assume was original but may have been custom? I am looking to mount a kicker on the revenge 21 i currently have any ideas? a standard stainless garelick or similar doesnt seem to fit. thanks for any help.

Posted by Phil T on 03/30/15 - 8:36 AM

Take a look at the Personal Pages of other Revenge 21 owners to see what they have used.

Personal Pages are under "Photo Gallery" on the menu bar.

Posted by Johnnyt707 on 03/30/15 - 4:23 PM

thank you phil no luck there but i didnt know about the page pretty nice projects over there

Posted by tom blinstrub on 03/31/15 - 2:33 AM

I have my 8 hp kicker mounted next to my 90 hp engine. your motor is probably wider but might work. If I turn the main engine all the way when trolling with the kicker it will hit so I watch for that. You might have to remove the ski eye.

Posted by Johnnyt707 on 03/31/15 - 4:30 PM

do you by chance have a picture of your set up? i have a 150 four stroke main and a 9.9 kicker

Posted by tom blinstrub on 04/01/15 - 11:19 AM

i don't have a good photo of it but you could hang the kicker on the transom and turn the motor left and right and see if it's too tight. My 90 is a 3 clylnder in line and my 2 stroke 8 is narrow. Your main engine might be too widebut try it out.