Posted by wlagarde on 05/10/14 - 9:41 AM
#37
Wing15601 is on the right track. Add a stainless washer between the prop and the existing spacer (install thrust washer, then prop, then additional stainless washer, then the aft spacer, and then the nut). Be sure the inner diameter of the washer is large enough to slide over the splined portion of the shaft.
I had this same problem with my solas stainless prop on my nussan outboard and this solved the problem.
Edited by wlagarde on 05/10/14 - 10:01 AM