Posted by A Little Madness on 11/30/10 - 9:11 AM
#2
From a quick look at your boat on your personal page, you may be able to craft something similar to what we did on A Little Madness using an old teak swim platform off a sport fisher. I was able to use the side ledges, with an additional teak support block, and the stern drain ledge to support mine. It would appear you'd have to do some additional support structure on the sides, but it's doable. After taking interior measurements we bought a used teak swim platform on e-bay which I cut down, west system epoxy'd, varnished, and reassembled. The net result can be seen on our personal page. Good Luck!