Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Whaler Dash Panels
Posted by ratherwhalering on 03/24/05 - 3:26 PM
#1
The replacement instrument panels for the classic Montauk and Ourtage dash are made and shipped from Ultra Panel Marine, located in Miami, Florida. Part number 1026350. Their telephone number is (305) 888-7709. The replacement panels are slightly different than the older panels. The white pin striping is pretty much square, without the fancy deviation around the mounting screw holes. Still pretty nice, though.
Posted by Joe Kriz on 03/24/05 - 3:33 PM
#3
We also show this info for the Fuse/Switch Panel. They must come from the same company Rob mentioned.
Black, Fuse/Switch Panel with Fuses and Switch, Part #1026830
Posted by Joe Kriz on 03/24/05 - 3:56 PM
#4
Mike,
I can't seem to find any photos of the Fuse/Switch Panel. Can you point me in the right direction?
There were two types. One used on the Outrages and one larger one used on the Montauks.
Posted by Joe Kriz on 03/24/05 - 4:08 PM
#5
We don't have a picture yet. But I had the part numbers in the Web-less section. I think I still have my old one, but it is in really bad shape. I'll see if it's worth posting a picture of it.
Posted by ratherwhalering on 03/25/05 - 8:08 AM
#6
I will be ordering a set of the smaller panels next week, and I will make sure to take pictures before we mount them. I thought the Outrage had the exact same panels as the Montauk, and two additional, smaller panels located above the console hatch and below the dashboard?
Posted by Joe Kriz on 03/25/05 - 8:13 AM
#7
Rob,
The Outrage and the Montauk from 1983 to 1990 did have the same size instrument panels on each side of the helm.
One of the Montauks 'Instrument' panels was actually a fuse/switch panel whereas the Outrage had two smaller fuse/switch panels above the lower console door as you mention. So, in actuallity, there were two different fuse/switch panels, one for the Outrage (smaller) and one for the Montauk (larger).
Posted by Jeff on 04/06/05 - 1:37 PM
#9
How much are they? Are they still made of metal?
Posted by TomB on 11/07/05 - 10:20 AM
#10
Does anyone know the dimensions of the above blank panel #1026350? I haven't been able to find them and am looking at using them in a project. Thanks...
Tom
Posted by Joe Kriz on 11/08/05 - 10:06 AM
#11
Tom,
The instrument panels are 5 15/16" x 10 3/4"
The switch panels for the Outrage/Revenge are shown here in a drawing by LHG. (Larry Goltz)
Edited by Mike on 03/23/07 - 5:57 AM
Posted by TomB on 11/10/05 - 9:02 AM
#12
Joe,
Sorry, I forgot to thank you for the help...
Tom
Posted by TomB on 11/14/05 - 11:02 AM
#13
FYI - I just ordered 2 of the blank panels #1026350 from Sue at Twin Cities at $24.00 each. She checked with BW and they only had 18 left in stock (I guess now 16). Sue said that based on BW's history, they probably would not stock any more.
Tom
Posted by Revenge 25 on 11/23/05 - 7:32 AM
#14
I spoke to Evette at Ultra Panel Marine, and she told me the price for the instrument panel, part #1026350, was $21.00 plus shipping. Their phone number is (305)888-7709 and their fax is (305)888-7285.