---

I have a 2008 Conquest 285, the cabin door does not slide well. Any advise on how to replace the trucks/wheels on the door? I cannot find any posts anywhere on this.

Thanks

---

Review Sheet #6 of 9 of the drawing "Deck-Outfit-Midship-Assembly-and-Parts-List-2008 for the assembly of the door.

http://bostonwhaler.com.s3.amazonaws....t-2008.pdf

If the door simply slides, I would try a spray in the track.

If there are wheels in a extruded slider, I would spray grease.

To remove the door to access the slider, I think you can remove the end "stops" at the end of the track and on the bottom threshold and then slide the door to starboard.

Try adding grease to the wheels and reinstall.

Post any questions/comments you have.

Note - There are approximately 47 technical drawings, diagrams and parts lists for your make, model and year on https://www.bostonwhaler.com/boat-own...resources/

I recommend you enter the Year, Model Family, Model and ALL for the list. Download and save/print for future use.

Hope this helps.

---

Thanks Phil the grease did the trick!

---

Excellent. Now, next time you are out, take photo and post it.