Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: De Persia scupper model 49417
Posted by bryan wheeler on 02/02/17 - 7:49 AM
#1
I have a 1986 Outrage Cuddy 22 and am looking to replace the engine well scupper.I want to replace it with the factory original part.That part is a De Persia and has the number 49417 on it.If anyone has one or knows where I can purchase please contact me.Thanks
Edited by bryan wheeler on 02/02/17 - 7:50 AM
Posted by Phil T on 02/02/17 - 8:08 AM
#2
Bryan -
I presume this is for the I/O model.
Easiest path is to contact Sue Lodel, Parts Manager, Twin Cities Marine. She is a parts guru and they are a Master Whaler dealer.
www.beacontcm.com
Posted by bryan wheeler on 02/02/17 - 1:01 PM
#3
Thanks for the quick response Phil.I should have posted more info in my original post to include that the boat is an outboard model.I contacted Sue a couple weeks ago and was told the part is no longer available so I figured I would reach out to the Whaler community and see if anyone had one they are willing to sell.
Posted by Joe Kriz on 02/02/17 - 1:25 PM
#4
I have never seen factory Scuppers on that model.
Do you have any photos to share?
Posted by Phil T on 02/03/17 - 5:44 AM
#5
Did Sue have a substitute?
Posted by bryan wheeler on 02/03/17 - 9:59 AM
#6
Will do Joe...I'll try to get a couple of pictures this weekend and get them posted. I was hesitant to call it a scupper but it's a clear plastic housing that has a ping pong ball in it that restricts water flow in one direction.It is mounted in the engine well and allows the water to run out of the fishwell to the motor well.
Phil, there are other options but I am trying to find an original one before I travel down that road.
Thanks for the help!
Posted by gchuba on 02/05/17 - 7:30 AM
#8
I removed and sealed that scupper hole in my transom. It was just an inch or two above the bottom of the splash well. If I still have it (may have thrown it out) yours free if I run across it. Are you keeping your boat factory original? That ball assembly never worked for me.
Garris
Posted by bryan wheeler on 02/17/17 - 12:33 PM
#9
Garris,That would be fantastic! if you do run across it I would love to have it,and yes i'm trying to keep it factory original.