Whaler Central - Boston Whaler Boat Information and Photos

Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Center Console Rod Holder(s) Replacement

Posted by mct on 09/05/16 - 7:19 PM

I have a 1987 18' Outrage. I need to start replacing the center console plastic rod holder(s). I checked the OEM Part Index, but OEM rod holders are no longer available. Please let me know if these can be purchased or, if not available for purchase, how to make them myself. Thanks in advance.

Posted by MSBrown253 on 09/06/16 - 8:23 AM

They are available from Specialty Marine for about $175 right now, or if you are handy, there are plans in the reference section to make your own. That's the route I'm going with mine.

Posted by Phil T on 09/06/16 - 9:02 AM

I would be triple check the Specialty Marine product is the same dimensions and fits the OEM cushions.

From looking at the drawings, it appears to be a straight forward DIY.

Posted by MSBrown253 on 09/06/16 - 11:02 AM

Has anyone built the rod holders based on the plans in the reference section? I am looking at them now, and there are a couple critical dimensions missing. Namely, how deep are the 1" radius cutouts? I want to ensure the cushions will fit properly when done.

Posted by mct on 09/07/16 - 5:28 AM

I am only looking to replace the PVC rod holders, not the wood. Specialty Marine will sell the PVC rod holders on an individual basis. I have searched the internet as well, but have not otherwise found a replacement. The rod holders from Specialty Marine do not have the metal pin at the bottom that stops and holds up the rod. What exactly is used and where can I find one?