Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: 1987 Montauk 17 seat rod holder caps
Posted by whalerlibby on 08/15/16 - 7:20 AM
#1
Where can I find something to replace or cover the rod holders built into the seat back?
Thanks.
Posted by whalerlibby on 08/17/16 - 9:17 AM
#3
I actually found white vinyl caps to cover these. They are made by whitecap industries. pn s-1957L. Bought them from Marineengineparts.com for a couple bucks each.
Posted by Joe Kriz on 08/17/16 - 11:38 AM
#4
whalerlibby wrote:
I actually found white vinyl caps to cover these. They are made by whitecap industries. pn s-1957L. Bought them from Marineengineparts.com for a couple bucks each.
Been there done that.
Did not fit very well and did not like them.
http://www.marineengineparts.com/cata...?q=s-1957L
Edited by Joe Kriz on 08/17/16 - 11:56 AM
Posted by whalerlibby on 08/18/16 - 7:01 AM
#5
Joe Kriz wrote:
whalerlibby wrote:
I actually found white vinyl caps to cover these. They are made by whitecap industries. pn s-1957L. Bought them from Marineengineparts.com for a couple bucks each.
Been there done that.
Did not fit very well and did not like them.
http://www.marineengineparts.com/cata...?q=s-1957L
ok, thanks. I am going to wait for the them to come in and try them out since they are already in route. I will go from there. How difficult is it to replace them with the Lee's rod holders?
Posted by Finnegan on 08/19/16 - 11:47 AM
#6
Unlike Joe, I have had good experience with the Whitecap rod holder caps. Although they are designed for a straight top holder, they will still go on over the flared lip of the Whaler holders. They are a little difficult to get on, and at first appearance seem to not fit, but they will and once done look good, and fit firmly. I much prefer the look of white vs the Perko black.
They have a double lip design, and once on, the outer lip has to be trimmed down to match the height the rod holder protrudes above the top of the seat. Put a piece of masking tape around as a guide for a straight and true cut with a razor knife. Unfortunately I do not yet have any photos of these caps installed, but can do so soon.
And another option, of course, is to cut the flare off the top of the Whaler holder, and block up the bottom to obtain the desired height above seat back. But I really don't think this is necessary.
Edited by Finnegan on 08/19/16 - 11:49 AM
Posted by whalerlibby on 08/19/16 - 12:31 PM
#7
Finnegan wrote:
Unlike Joe, I have had good experience with the Whitecap rod holder caps. Although they are designed for a straight top holder, they will still go on over the flared lip of the Whaler holders. They are a little difficult to get on, and at first appearance seem to not fit, but they will and once done look good, and fit firmly. I much prefer the look of white vs the Perko black.
They have a double lip design, and once on, the outer lip has to be trimmed down to match the height the rod holder protrudes above the top of the seat. Put a piece of masking tape around as a guide for a straight and true cut with a razor knife. Unfortunately I do not yet have any photos of these caps installed, but can do so soon.
And another option, of course, is to cut the flare off the top of the Whaler holder, and block up the bottom to obtain the desired height above seat back. But I really don't think this is necessary.
Great to hear, thanks for posting. I should be receiving them in the mail today or tomorrow. I am replacing a bunch of other parts. Cant wait to try them out.
Posted by whalerlibby on 08/24/16 - 5:27 PM
#8
Joe Kriz wrote:
whalerlibby wrote:
I actually found white vinyl caps to cover these. They are made by whitecap industries. pn s-1957L. Bought them from Marineengineparts.com for a couple bucks each.
Been there done that.
Did not fit very well and did not like them.
http://www.marineengineparts.com/cata...?q=s-1957L
I ended up buying the lee's rod holder medium 90 degree and they look incredible. Thanks.
Posted by Joe Kriz on 08/24/16 - 5:49 PM
#9
whalerlibby,
Yes, those worked perfectly for me.
I assume you did not like the Whitecap rod lips?
I ended up giving mine away after installing the Lee's vertical rod holders.
Anyone can view photos on my personal page.