Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Outrage cooler cleats - Installation location
Posted by lat 12 on 02/29/16 - 10:34 AM
#1
1987 Boston Whaler outrage 18. I am looking for a picture of the proper installation of the cooler cleats? I downloaded the diagram and making them now.
thanks
lat 12
Edited by Phil T on 02/29/16 - 3:20 PM
Posted by aeriksen on 02/29/16 - 6:45 PM
#2
I had the same problem trying to figure out the installation of the cleats What I did was to set cooler in place and the opened the lid to ensure proper clearance, once I figured that out I placed tape on the deck outlining the edges of the cleat. With the cleats still in place I drilled smaller holes through the cleats and into the deck, once you have the holes in the deck you can then drill the cleats the correct drill size along with the deck holes. hope this helps.
Posted by dreilly on 03/01/16 - 10:58 AM
#3
Lat - if you go to my personal page you can see the alignment with the console on the port side. It is the same on the starboard side.
Edited by dreilly on 03/01/16 - 10:59 AM
Posted by lat 12 on 03/01/16 - 5:09 PM
#4
Goodevening Aeriken and Drielly,
Many thanks for the tips and photo.
respectfully
Richard