Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: 1990 Outrage 19' Bowrail dimensions and installation??
Posted by jackobl on 03/22/14 - 9:35 PM
#1
I just bought a 1990 Outrage 19’ and it does not have the bow rail on it so I will purchase the stainless steel tubing, and the fittings and do it myself but I need to know the length and height of each section and the degrees of all the fittings. Can anybody help me with a diagram or specs of the bow rail? Thank you.
(moderator note: a 1990 would be an Outrage 19', not an 18')
Edited by Joe Kriz on 03/23/14 - 7:43 PM
Posted by W J Moody on 03/23/14 - 6:57 PM
#2
I have a bow rail assembly off of a 1989 Outrage which is bowed slightly from being forced into a storage compartment, It is not kinked and could be easily reshaped. One piece welded with mounting plates.
Posted by W J Moody on 03/24/14 - 1:11 PM
#4
My 1989 Outrage is an 18. Bow rail I guess would be same.
Posted by Joe Kriz on 03/24/14 - 1:59 PM
#5
Yes, late 1988 changed to the one piece/welded 1" stainless rails.
Older rails had fittings and were 7/8" in diameter.
Posted by jackobl on 03/30/14 - 8:50 AM
#6
Yes Joe, it is a 1990 18’6” outrage I. I was looking to make the bow rail out of 1” fittings and stainless steel piping but I need the height and length dimensions of each section or of the original bow rail so I can try and make it the same. WJMoody: Would you be interested in selling the bow rail you have and send it to me. Please consider and remember that I am currently in Honduras and shipping would be very expensive. Thanks for the help.
Posted by W J Moody on 03/31/14 - 5:56 PM
#7
Would be glad to help but I think shipping expense would be out of this world as the rail is all one piece welded as originally installed on a 1989 Outrage. It is located in Corpus Christi Texas not far from Mexico.