Whaler Central - Boston Whaler Boat Information and Photos

Thread subject: Whaler Central - Boston Whaler Boat Information and Photos :: Screw size for cooler hooks

Posted by Jay Fitz on 06/15/13 - 6:15 AM

I just received new cooler hooks from Sue at Twin Cities (EXCELLENT service) but they did not come with screws for attaching them to the cooler. No big deal, as I can just go pick a few up. But, was wondering if anyone knew what length would work as I dio not know the thickness of the cooler walls and do not want to puncture through the interior of the cooler.

I have the replacement 94qt Igloo on my Montauk 17.

Thanks.

Posted by Tom W Clark on 06/15/13 - 6:25 AM

I use #8 x 1/2" truss head sheet metal screws. There is some thickness to the cooler so longer screws may work as well.

Posted by Jay Fitz on 06/15/13 - 6:50 AM

Thanks Tom!

Posted by out2fish on 06/25/13 - 8:15 AM

I am installing cooler brackets for front cooler Montauk Do I need to use a marine type filler in new screw holes

Posted by Marko888 on 06/25/13 - 8:53 AM

A polysulfide caulk, such as BoatLIFE Life-Calk, should be used to seal those screws in the hull to prevent water intrusion.

http://boatlife.com/life-calk-sealant...e-3oz.html

Edited by Marko888 on 06/25/13 - 8:54 AM