---

Hello all happy new year. Much to my surprise, my whaler made it through sandy without a scratch. Might have been one of the only boats at the marina where it was during the storm. I'm not embarrassed to say it was a very emotional moment when I finally was able to get to it after the storm. It was almost like mine was in a bubble. Sounds so selfish when I know so many lost all.

Anyway. The only damage was when someone pulled my stern light out and pulled the wires off the socket. How do I rescuer the wires to the existing socket or replace it. Thanks for any help.

---

Just buy a new Perko socket assembly (Fig. # 0024DP1) for a few dollars and splice it in.

http://www.lowcostboatingstore.com/PE..._2942.html

---

The 0024DP1 has 10 inch pigtail wiring

The 0024DP2 has 60 inch pigtail so you wouldn't have to splice.
See both versions here:
http://perko.com/catalog/category/navigation_lights_under_20_meters/product/214/

---

Good catch Joe. Here are two low cost sources for Perko's 0024DP2:

http://www.lowcostboatingstore.com/PE..._2943.html

http://www.jmsonline.net/socket-doubl...t-2803.htm

---

Thanks guys. What about the globe. Mine has some age cracks.

---

Ed,

Do your self a favor and take a look on the left sidebar under "OEM Part Photos Index.
http://www.whalercentral.com/viewpage...page_id=69

---

Thanks again. Found everything and placed an order.