Posted by Fishmore on 04/12/09 - 7:12 PM
#16
Measurements...
From the center of the drain hole it is 24" to the center of the transducer. From the port gunwale to the center of the transducer it is 8". The transducer is an Airmar P66 on a Furuno unit and it is mounted on a piece of 3/4" thick starboard. So the starboard is sandwiched between the transducer mount and the transom. I took a straight edge and held it up to the bottom of the hull and the bottom of the transducer is 3/4" below the hull's running surface.
Hope that helps...
Tim
Edited by Fishmore on 04/12/09 - 7:13 PM