1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1989 Montauk Rub Rails Concern
enggass	#1  Posted on 10/09/17 - 4:09 PM
Member Personal Page Posts: 90 Comments: 0 Joined: 09/15/17	Is the fiberglass sealed under the rub rails on theses boats? I gave a fair amount of cracking in plastic next to the rubber on mine. I hope that it is not a window to moisture... is it an easy repair?
enggass	#2  Posted on 10/18/17 - 6:48 PM
Member Personal Page Posts: 90 Comments: 0 Joined: 09/15/17	Can anyone tell me the actual length of the rub rail for a 17’ montauk? I’d like to order one, but my boat is ‘in the shop’ so I cannot measure.
Phil T	#3  Posted on 10/19/17 - 4:08 AM
Administrator Personal Page Personal Album Project Albums Posts: 6983 Comments: 6 Joined: 03/26/05	If you contact and order from Sue Lodel, Parts Manager at Twin Cities, she already knows. slodel@beaconmarinellc.com www.beacontcm.com 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
enggass	#4  Posted on 10/19/17 - 5:31 AM
Member Personal Page Posts: 90 Comments: 0 Joined: 09/15/17	Ok, but can anyone tell me the actual length needed for a Rub Rail on a 1989 17' Montauk? The boat is 16'7" in length. I know Specialty Marine sells a Rub Rail kit for this at 37'. Is that a sufficient amount of length being that it has to wrap around the Bow?
EJO	#5  Posted on 10/19/17 - 5:39 AM
Member Personal Page Posts: 669 Comments: 6 Joined: 11/25/12	engass I don't have a 17 Montauk but simple math will tell me 37 ft is not enough. You need at least a foot or so on each side of the transom. leaving you 35 feet. Each side is probably 16-1/2 ft for 33 feet total leaving only 2 feet for the bow. Hence 37 feet is not enough unless you can stretch it which is doubtful. Skipper E-J m/v "Clumsy Cleat" a 2008 Montauk 150
enggass	#6  Posted on 10/19/17 - 6:25 AM
Member Personal Page Posts: 90 Comments: 0 Joined: 09/15/17	Well, I purchased a Kit from Specialty Marine: "Boston Whaler OEM 3 piece 37' rub rail kit. Fits all Boston Whaler Classic 9'-17' hulls from 1958-1999" I can always send it back. Has anyone here ever purchased products from them? http://www.specialtymarine.com/BOSTON...-p141.html
Colekitchel	#7  Posted on 10/19/17 - 6:33 AM
Member Posts: 3 Comments: 0 Joined: 03/07/17	I ordered that same kit, and it worked great my 1979 Montauk. Be sure to have some help, pretty labor intensive job.
enggass	#8  Posted on 10/19/17 - 6:36 AM
Member Personal Page Posts: 90 Comments: 0 Joined: 09/15/17	Thanks. That's all I needed to know. I plan on having someone with experience install.