1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

1999 21 outrage
mitchmerchant	#1  Posted on 07/07/17 - 6:46 AM
Member Posts: 6 Comments: 0 Joined: 06/20/06	Hello. I just bought a 99 outrage 21, with a soft sub floor. On this boat, the entire floor including the fish boxes comes out as one piece. The problem Im having is the drains on the fish boxes. It has the thru-hull drain, as well as the horizontal drains. I dont know how to remove them to get the floor out. Has anyone done this? Thanks!
Phil T	#2  Posted on 07/07/17 - 7:54 AM
Administrator Personal Page Personal Album Project Albums Posts: 6986 Comments: 6 Joined: 03/26/05	On Boston Whaler's site, under Owners/Resources you can view, download copies of diagrams and parts lists. For your model there are many. Here are some that may help your specific issues: http://bostonwhaler.com.s3.amazonaws....2-1999.pdf http://bostonwhaler.com.s3.amazonaws....2-1999.pdf http://bostonwhaler.com.s3.amazonaws....3-1999.pdf 1992 Outrage 17 I 2019 E-TEC 90, Viper 17 2+ 2018 Load Rite Elite 18280096VT
mitchmerchant	#3  Posted on 07/07/17 - 1:12 PM
Member Posts: 6 Comments: 0 Joined: 06/20/06	Thanks for that Phil... yea, I have all of those pdfs, but was hoping someone has done this job to guide me through the process. Im not sure how those thru-hulls are attached...
porthole2	#4  Posted on 07/08/17 - 8:04 AM
Member Personal Page Posts: 72 Comments: 1 Joined: 10/28/05	I'm pretty sure if you look inside the fish box, up towards the deck you will see the actual box is not attached. The "well" of the fish box is part of inner hull. That deck comes up just like you see in the PDF. At least it appears that way on my 1999 21 Outrage. Edited by porthole2 on 07/08/17 - 8:05 AM Thanks, Duane
mitchmerchant	#5  Posted on 07/08/17 - 1:32 PM
Member Posts: 6 Comments: 0 Joined: 06/20/06	Duane, Thanks for that...I just saw where you are correct. What about the 2 drains that drain out back? How do I unscrew or remove those to get the floor out?
porthole2	#6  Posted on 07/16/17 - 10:35 AM
Member Personal Page Posts: 72 Comments: 1 Joined: 10/28/05	mitchmerchant wrote: Duane, Thanks for that...I just saw where you are correct. What about the 2 drains that drain out back? How do I unscrew or remove those to get the floor out? Contort your upper body into the opening on the port side or in the seat well on the right and you will see the 1.5" hoses attached to the deck drains. If "I" was pulling the deck I would just cut the hoses and replace them when the deck is reinstalled. Thanks, Duane