View Thread
Before Posting, Please Read Our Posting Guidelines Below.

1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

 Print Thread
1997 Rage 15 jet boat gas shock size
AndrewM
#1 Print Post
Posted on 08/28/16 - 2:59 PM
Member

Posts: 3
Comments: 0
Joined: 06/10/14

I have a Rage 15 with the 175 Merc (no grief please, I like the boat). The engine cover is lifted by two gas shocks and the ones in my boat were the 20 lbs size, but they don't hold the cover up. I got tired of propping it up with a piece of wood so I replaced them with new 20 lbs gas shocks, figuring the old ones were worn out. New shocks don't hold up the cover either.

I am thinking the previous owner replaced the shocks with a smaller size for some reason. He did some other screwy fixes, so this would be no surprise. I'd like to know what size shocks are on other Rage 15's. Can anyone with a Rage 15 tell me the markings on their gas shocks, assuming they hold their engine cover up?

Thanks

 
Joe Kriz
#2 Print Post
Posted on 08/28/16 - 3:11 PM
User Avatar
Site Owner
Personal Page
Personal Album
Photo Albums
Project Albums

Posts: 11424
Comments: 452
Joined: 03/18/05

This drawing shows 20 inch ext. gas cylinder
http://whalerparts.com/Diagrams/1998/.../8-1-2.pdf
#47
0638106

See page 6 below:
It says part #0638106 is 60 PSI cylinder 20 ext.
http://rnr-marine.com/images/Sea-Ray_...Manual.PDF


Edited by Joe Kriz on 08/28/16 - 3:19 PM
 
AndrewM
#3 Print Post
Posted on 08/28/16 - 3:28 PM
Member

Posts: 3
Comments: 0
Joined: 06/10/14

I've never seen that diagram before. Thanks, it should be handy. Any others on the site I can download?

Editing the shock info: My Rage has shocks that are 12" compressed and 20" extended, 20 lb. pressure and a very funky engine cover hinge setup that hides the hinge inside, under the engine cover. The cover doesn't flip all the way up, you get about 24" of clearance at the seat to reach in. For any real engine work you have take the cover off. My hinges appear to be stock, from the clean way they are bolted to the engine cover.

That diagram has what looks like a fairly standard butt hinge. Those would be great, allowing the cover to swing way up.

This expands my question a bit. Anyone with a 1997 Rage 15 that has butt hinges on the outside of the engine cover? Anyone with the hidden hinges like mine? Either way, what are the markings on your gas shocks.


Edited by AndrewM on 08/30/16 - 3:48 PM
 
AndrewM
#4 Print Post
Posted on 08/31/16 - 5:27 AM
Member

Posts: 3
Comments: 0
Joined: 06/10/14

Joe,
Missed that parts # note on the first read, thank you. I will try the 60 lbs shock from the sea ray. Interesting that they use the same parts number as Whaler.

I would love to see a picture of of a 1998 Rage 15 hinge assembly, if any owners could post one. It would be great to convert my cover to the butt hinge style and get a higher lift on the engine cover.

thanks.

 
Jump to Forum:
Bookmark and Share
Today's Date & Time
March 29, 2024 - 6:14 AM
Users Online
Welcome
93SL16MN
as the newest member

· Guests Online: 10
· Members Online: 0
· Total Members: 49,964
Login
Username

Password

Remember Me


Not a member yet?
Click here to register.

Forgotten your password?
Request a new one here.
Top 5 Models Posted
· Montauk 17 1,622
· Sport 13 1,354
· Outrage 18 549
· Nauset 16 396
· Sport 15 363

View all Models Here
Render time: 0.15 seconds Copyright WhalerCentral.com © 2003-2024 82,709,535 unique visits