1. Use the full 4 digit year for everything you are asking your question about. Example: 1962, 1988, 2000, 2011
2. Include the correct name of your Whaler model. Example: Montauk 17, Montauk 170, Outrage 26, Outrage 260
3. Include the length when necessary. Example: 16, 17, 18, 20, 22
4. Do not post your email address anywhere on this site as it is already in your user profile.

Waterski pylon for outrage mounted around engine help
Zekestone	#1  Posted on 06/27/15 - 8:44 AM
Member Posts: 1 Comments: 0 Joined: 06/27/15	Hi everyone, Anyone seen a pylon rig mounted around the engine on an outrage with an adjustable insert on center tube? The pylon insert is missing and I'd love to find replacement or speak with manufacturer. Thanks for any help!
MrMark	#2  Posted on 10/04/15 - 6:35 PM
Member Posts: 1 Comments: 0 Joined: 09/13/15	I don't think that is for a ski pylon. My Outrage (1998 20') has the same railing around engine well that you describe. I bought my boat used and it had a filet table inserted there. I would not think it strong enough for pulling skier. Interested in experience / opinions if I am wrong about this.
cdnwhaler	#3  Posted on 10/06/15 - 9:53 AM
Member Personal Page Posts: 200 Comments: 0 Joined: 04/01/05	I'm a little confused by the description but this is what I've been using for many years in a 1984 Outrage 22. Works great and pops in or out in minutes. http://www.attwoodmarine.com/store/pr...xed-height Perhaps you can order parts if this is same rig you speak of. Edited by cdnwhaler on 10/06/15 - 9:55 AM 1984 Outrage 22
Reel Easy	#4  Posted on 10/07/15 - 8:54 AM
Member Posts: 196 Comments: 1 Joined: 06/17/14	I'm thinking of using the same pylon on a 1974 Outrage 21. Problem is I have twins and not sure if these pylons will fit. Would be interested in some info on how you mounted yours. I suspect metal backing plates are required when mounting on cap glass in splash well. Any thoughts? Thanks.
Buoy	#5  Posted on 10/08/15 - 2:32 PM
Member Posts: 40 Comments: 0 Joined: 01/01/08	Zekestone wrote: Hi everyone, Anyone seen a pylon rig mounted around the engine on an outrage with an adjustable insert on center tube? The pylon insert is missing and I'd love to find replacement or speak with manufacturer. Thanks for any help! Both the filet table and ski pylon were options that used the same rig, though the ski pylon required two leg supports as well. I think this is your part number and they are extremely hard to come by because they're not manufactured any more: BW Part # 1047869 Swiveleze Part # 92833 Good luck. Edited by Buoy on 10/08/15 - 2:33 PM 2006 Conquest 235
Joe Kriz	#6  Posted on 10/08/15 - 3:04 PM
Site Owner Personal Page Personal Album Photo Albums Project Albums Posts: 11430 Comments: 452 Joined: 03/18/05	A friend of mine has both the Fish Station and the Swiveleze Ski Pylon on his 1996 Outrage 17' II I had the Fish Station on my 1997 Outrage 17' II Scroll down to Fishing/Bait Station here: http://www.whalercentral.com/download...p?cat_id=6 Would be nice to get the Ski Pylon Part diagram from someone someday. There was also a fold out teak table available for all the models that had that same railing setup. I had one of these also. http://www.whalercentral.com/photogal...hoto_id=60 http://www.whalercentral.com/photogal...hoto_id=61
Radlax23	#7  Posted on 10/08/15 - 8:10 PM
Member Personal Page Posts: 28 Comments: 1 Joined: 07/13/13	On my 1973 21 Outrage I have been using a turboswing. I have had it for 2 years and have not had any problems. It allows me to pull a tube or a skier up. It has different sizes to accommodate for multiple engine boats. http://turboswingus.com 1973 21 ft Boston Whaler Outrage
cdnwhaler	#8  Posted on 10/09/15 - 5:24 AM
Member Personal Page Posts: 200 Comments: 0 Joined: 04/01/05	On the link I provided to the Fixed height Swivel-Eze Ski Pylon there is a link to download a PDF of the installation and a parts list. Here it is again: http://www.attwoodmarine.com/store/pr...xed-height The clevis pin support pieces are through bolted on my teak gunwales. These are length adjustable to help the placement on different boats. The main center up right of the fixed height piece screws into a 7 or 8 inch diameter plate which is screwed to the floor. It's not a toe/foot breaker. We hardly know it's there anymore. The entire pylon comes out and in in minutes and is stored in the floor hatch in front of the console. We've towed many skiers, tubes and a 10 ft Zodiac with no problems and will easily work with twins. The other Swivel-Eze pylon is an adjustable height one here: http://www.attwoodmarine.com/store/pr...ble-Height There doesn't seem to be a parts list or installation advice for this one. And I don't know much about it. ZEKESTONE: I just found your June post on Hull Truth with pictures. Whats the diameter of hole for the post you're looking for? Perhaps the Swivel-Eze post will work or maybe some place can make you one. Edited by cdnwhaler on 10/09/15 - 5:59 AM 1984 Outrage 22